BITMAIN APW3 PSU 1600W POWER SUPPLY

$55.00

Close
Price Summary
  • $55.00
  • $55.00
  • $55.00
In Stock
Compare
Category:
Description

BITMAIN APW3 PSU 1600W POWER SUPPLY

The power cord is not included, please find one with at least 10A from your local market.

DESCRIPTION

The power cord is not included, please find one with at least 10A from your local market.

The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

This Bitmain Power Supply was intended to be an AntMiner Power Supply and works with: AntMiner S9I, AntMiner S9, and all previous AntMiner models as well as the Avalon 841, 821, etc. It can be used as a power supply for GPU mining and will support up to 5 cards that use 2x 8 Pin Connectors for power and is one of the best power supplies for mining.

The shipping for this batch will start soon after 1st November 2017, depending on when the units are ready to ship out and your position in the order queue.

  • Includes ten 6-pin PCIe connectors
  • Maximum output: 1200W @ 110v-120v, 1600W @ 220v-240v
  • Power cord not included, requires standard PC power cable (C13)
  • Click Here for Manufacturer Warranty information

Part Number / SKU: BLO-BIPS-APW310-USED

ADDITIONAL INFORMATION

WEIGHT 6 lbs
DIMENSIONS 13 × 7 × 5 in
OUTPUT – DC VOLTAGE 12.15V
OUTPUT – RATED CURRENT(220V INPUT) 133A
OUTPUT – RATED CURRENT(110V INPUT) 100A
OUTPUT – RATED POWER(220V INPUT) 1600W
OUTPUT – RATED POWER(110V INPUT) 1200W
OUTPUT – RIPPLE & NOISE <1%
OUTPUT – VOLTAGE REGULATION <2%
OUTPUT – SOURCE REGULATION <1%
OUTPUT – LOAD REGULATION <1%
OUTPUT – SETUP, RISE TIME <2S
OUTPUT – POWER OFF PROTECTION TRIP TIME >9mS
OUTPUT – INTERFACE TYPE 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
OUTPUT – NOISE LEVEL <43DB
INPUT – VOLTAGE RANGE 100-240V AC
INPUT – STARTING VOLTAGE 95-105V AC
INPUT – FREQUENCY RANGE 47-63Hz
INPUT – POWER FACTOR >0.95 (full load)
INPUT – LEAKAGE CURRENT <1.5mA (220V 50Hz)
PROTECTION – LOW-VOLTAGE INPUT 80-89V AC
PROTECTION – OUTPUT SHORT CIRCUIT Yes
PROTECTION – OUTPUT OVERCURRENT 134-185A max.
PROTECTION – OVERHEAT PROTECTION Yes
ENVIRONMENT CONDITIONS – OPERATING TEMPERATURE -20°C – 50°C
ENVIRONMENT CONDITIONS – OPERATING HUMIDITY 20% – 90% relative humidity (non-condensing)
DIMENSIONS 220mm*108mm*62mm
COOLING FAN Forced-air cooling
BRAND Bitmain
Reviews (0)
0 ★
0 Ratings
5 ★
0
4 ★
0
3 ★
0
2 ★
0
1 ★
0

There are no reviews yet.

Be the first to review “BITMAIN APW3 PSU 1600W POWER SUPPLY”

Your email address will not be published. Required fields are marked *

Scroll To Top
Close
Close
Shop
0 Wishlist
0 Cart
Close

My Cart

Shopping cart is empty!

Continue Shopping